Semi Automatic Disc Filter

Filter designed for Pressure rating PN8 (8bar)
2 male threaded pressure port at the top for easy visiblity of pressure.
Disc cartridge enabled with spring loaded for full compressionn of disc andloosen during cleaning.
Filter with Clogging indicator, Red pop up comes out at x 0.6 kg/cm² pressure diﬀerential, indicated end user to clean ﬁlter manually.
During cleaning operation, all inlet water passes through the pipe, and water jets removes dirt from the discs.
Barrel with 1½" Drain port.
Handle for 90 degree rotation for cleaning of disc without dismantling of ﬁlter.
Disc housing fan gives hydro cyclonic eﬀect which makes particles in suspension that reduces cleaning frequency.
Grooved disc design with dimensional consistency proven with more than 95% ﬁlter eﬃciency

Cleaning of the ﬁlter must be done when pressure diﬀerential across the disc reaches 0.6 kg/cm2(8.5psi) or when the clogging indicator red button pops up.
To start cleaning mode of ﬁlter, turn the handle (top of the ﬁlter) 900 degree in clockwise direction.
Cleaning operation starts, system pressure might increase during cleaing operation.
When cleaning operation done, ﬁrst ﬁlter handle direction should be at ﬁltration mode. And then ﬂushing valve gradually close.
In case the the ﬁlter is still clogged (pressure indicator button is up). Repeat the above steps for eﬀective disc cleaning.

Performance Data
Model	134T-SAD	136T-SAD
Max. Working Pressure	8 kg/cm²	8 kg/cm²
Recommended flow	417 lit/m (25m³/hr)	667 lit/m (40 m³/hr)
Range of Flow Rate	18-27 m³/hr	35-50 m³/hr
Filter Disc (standard)	120 mesh PP Red disc (Single Removable cartridge)
Filtration Surface area	1080 cm²	1590 cm²
Inlet/outlet connection	2" BSP/NPT male thread	3" BSP/NPT male thread
Closing System	Stainless Steel / Hybrid Clamp
Distance between End connections	341 mm	344 mm
Filter height (With Ball Valve)	800 mm	930 mm
Filter width (With End Plug)	235 mm	235 mm
Cartridge Diameter	121 mm	121 mm
Cartridge Length	375 mm	510 mm
Drain Valve (1no.)	1½" Female x Female threaded
End Plugs (1nos.)	¾" Male Threaded

Performance Data

Model

134T-SAD

136T-SAD

Max. Working Pressure

8 kg/cm²

Recommended flow

417 lit/m (25m³/hr)

667 lit/m (40 m³/hr)

Range of Flow Rate

18-27 m³/hr

35-50 m³/hr